NAD Electronics T534 User Manual download pdf (Page 10)

Installation and Setup

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

ESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

SETTING UP THE PLAYER

The picture and sound of a nearby TV, VCR, or radio may be distorted

during playback. If this occurs, position the player away from the TV,

VCR, or radio, or turn off the unit after removing the disc.

DVD PLAYER CONNECTIONS

Depending on your TV and other equipment there are various ways

you can connect the player. Please refer to the manuals of your TV,

stereo system or other devices as necessary for additional connection

information.

Video and Audio Connections to Your TV

Make sure the DVD player is connected directly to the TV and not to a

VCR, otherwise the DVD image could be distorted by the copy

protection system.

Video

Connect the VIDEO OUT jack on the DVD player to the video in jack on

the TV using the video cable (V).

S-Video

Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in

jack on the TV using the S-Video cable (S).

NOTES

• For VIDEO OUT and S-VIDEO OUT jack connection, resolution must

be set to 480i or 480p by pressing RESOLUTION, however VIDEO

OUT and S-VIDEO OUT is always at 480i standard resolution.

• HDMI mode must be set to OFF for VIDEO OUT and S-VIDEO OUT

jack connection.

Component Video (Color Stream®)

Connect the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks on

the DVD Player to the corresponding in jacks on the TV using an Y

Cb/Pb Cr/Pr cable (C).

PROGRESSIVE SCAN (COLORSTREAM® PRO):

• If your television is a high-definition or “digital ready” television, you

may take advantage of the DVD Player’s progressive scan output for

the highest video resolution possible.

• If your TV does not accept the Progressive Scan format, the picture

will appear scrambled if you try Progressive Scan on the DVD Player.

NOTES

• You can change the resolution (480i, 480p, 720p, 1080i) for the

component/progressive scan video output by pressing RESOLUTION.

• For 720p and 1080i resolution, only non-copy protected discs can be

played back. If the disc is copy protected, it will be displayed at the

480p resolution.

• HDMI mode must be set to OFF for Component video connections.

• Progressive scan does not work with the analog video connections

(VIDEO OUT & S-VIDEO).

Audio Connection to Your TV:

Connect the left and right AUDIO OUT jacks of the DVD Player to the

audio left and right IN jacks on the TV (A) using the audio cables. Do

not connect the DVD Player’s AUDIO OUT jack to the Phono In jack

(record deck) of your audio system.

CONNECTIONS

T534_NAD_English_final_v6.qxd 12/13/04 3:37 PM Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Comments to this Manuals

No comments

NAD Electronics T534 User Manual Page 10

Comments to this Manuals

Related products and manuals for DVD players NAD Electronics T534