NAD Electronics S170 User Manual download pdf (Page 29)

GB

29

SPECIFICATIONS

CONDITION POSSIBLE CAUSE(S) POSSIBLE SOLUTIONS(S)

NO SOUND FROM ALL CHANNELS

• AC power unplugged

• power not switched on

• outlet is un-powered

•Tape Monitor is engaged

• Check AC cable, connection, and outlet

•disengage Tape Monitor

NO SOUND FROM SOME CHANNELS

• Faulty/missing cables

• <Speaker setup> channel(s) set to "No"

• power-amp or speaker-connections faulty

•Check cables

• check <Speaker setup> menu

• check power amp, cabling, and speakers

NO SOUND FROM SURROUND CHANNELS

• No surround listening mode is engaged

• surround-channels set to "No" on

<Speaker setup> menu

• surround-channels level set too low on

<Levels setup> menu

• Select appropriate listening mode

• correct <Speakers setup> or <Levels setup>

settings

NO SOUND FROM SUBWOOFER

• Subwoofer is off, unpowered, or improperly

connected

• subwoofer set to "No" on <Speaker setup>

menu

• sub level set too low on <Levels setup> menu

• Power-up subwoofer, check sub's AC outlet, or

check connections

• correct <Speakers setup> or <Levels setup>

settings

NO SOUND FROM CENTER CHANNEL

• Source is a 2/0 (etc.) Dolby Digital or DTS

recording without center channel

• center set to "No" on <Speaker setup> menu

• center level set too low on <Levels setup> menu

• Play a known 5.1-channel recording or select

Dolby Pro Logic or Mono mode

• correct <Speakers setup> or <Levels setup>

settings

NO DOLBY DIGITAL/DTS

• Source's digital output is not connected to an

S170 digital input

• Check connections

S170 DOES NOT RESPOND

TO S70 REMOTE

• Batteries are flat or incorrectly inserted

• IR transmitter window on remote, or IR receiver

window on S170 is obstructed

• S170 front panel is in very bright sunlight or

ambient light

• Check batteries

• check IR windows and ensure clear line-of-sight

from remote to S170

•reduce sunlight/room lighting

S170 DOES NOT RESPOND

TO FRONT-PANEL COMMANDS

•Microprocessor error • Power-down the S170 via the front-panel Power

key and unplug it from the AC outlet; wait five

minutes, re-connect and power up

1 2 ... 24 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments