NAD Electronics C315BEE User Manual download pdf (Page 2)

SAVE THESE INSTRUCTIONS FOR LATER USE.

FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE AUDIO

EQUIPMENT.

1 Read instructions

- All the safety and operating instructions should be read

before the product is operated.

2 Retain instructions

- The safety and operating instructions should be retained

for future reference.

3 Heed Warnings

- All warnings on the product and in the operating instructions

should be adhered to.

4 Follow Instructions

- All operating and use instructions should be followed.

5 Cleaning

- Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6 Attachments

- Do not use attachments not recommended by the product

manufacturer as they may cause hazards.

7 Water and Moisture

- Do not use this product near water-for example, near a

bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a

swimming pool; and the like.

8 Accessories

- Do not place this product on an unstable cart, stand, tripod,

bracket, or table. The product may fall, causing serious injury to a child or adult,

and serious damage to the product. Use only with a cart, stand, tripod, bracket,

or table recommended by the manufacturer, or sold with the product. Any

mounting of the product should follow the manufacturer’s instructions, and

should use a mounting accessory recommended by the manufacturer.

A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

product and cart combination to overturn.

10 Ventilation

- Slots and openings in the cabinet are provided for ventilation and

to ensure reliable operation of the product and to protect it from overheating,

and these openings must not be blocked or covered. The openings should never

be blocked by placing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the manufacturer’s instructions have

been adhered to.

11 Power Sources

- This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power

supply to your home, consult your product dealer or local power company.

The primary method of isolating the amplier from the mains supply is to

disconnect the mains plug. Ensure that the mains plug remains accessible at all

times. Unplug the AC power cord from the AC outlet if the unit will not be used

for several months or more.

12 Grounding or Polarization

- This product may be equipped with a polarized

alternating-current line plug (a plug having one blade wider than the other). This

plug will t into the power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the plug. If the plug

should still fail to t, contact your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

13 Power

- Cord Protection - Power-supply cords should be routed so that they are

not likely to be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

14 Outdoor Antenna Grounding

- If an outside antenna or cable system is

connected to the product, be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Section

820-40 of the NEC which provides guidelines for proper grounding and, in particular,

species that the cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

15 Lightning

- For added protection for this product during a lightning storm, or

when it is left unattended and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system. This will prevent damage

to the product due to lightning and power-line surges.

16 Power Lines

- An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits

as contact with them might be fatal.

17 Overloading

- Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of re or electric shock.

18 Object and Liquid Entry

- Never push objects of any kind into this product

through openings as they may touch dangerous voltage points or short-out parts

that could result in a re or electric shock. Never spill liquid of any kind on the

product.

WARNING: THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR

SPLASHING, AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHALL NOT BE PLACED ON THE APPARATUS. AS WITH ANY ELECTRONIC

PRODUCTS, USE CARE NOT TO SPILL LIQUIDS INTO ANY PART OF THE

SYSTEM. LIQUIDS CAN CAUSE A FAILURE AND/OR A FIRE HAZARD.

19 Damage Requiring Service

- Unplug this product from the wall outlet and refer

servicing to qualied service personnel under the following conditions:

When the power-supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into the product.

If the product has been exposed to rain or water.

If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as

an improper adjustment of other controls may result in damage and will often

require extensive work by a qualied technician to restore the product to its

normal operation.

If the product has been dropped or damaged in any way.

when the product exhibits a distinct change in performance-this indicates a

need for service.

20 Replacement Parts

- When replacement parts are required, be sure the service

technician has used replacement parts specied by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

re, electric shock, or other hazards.

21 Safety Check

- Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in

proper operating condition.

22 Wall or Ceiling Mounting

- The product should be mounted to a wall or ceiling

only as recommended by the manufacturer.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO РУССКИЙ SVENSKA

1 2 3 4 5 6 7 ... 65 66

Comments to this Manuals

No comments

NAD Electronics C315BEE User Manual Page 2

Comments to this Manuals

Related products and manuals for Loudspeakers NAD Electronics C315BEE