NAD Electronics 7600 User Manual download pdf (Page 2)

PRE-AMP SECTION

Phono input

Input impedance (R and C) MM 47kΩ / 120pF

MC 47kΩ / 120pF

Input sensitivity, 1kHz MM 0.28mV ref. 1W

MC 0.02mV ref. 1W

Signal/Noise ratio (A-weighted with cartridge connected) MM 76dB ref. 5mV

MC 76dB ref. 5mV

THD (20Hz - 20kHz) <0.04%

RIAA response accuracy (20Hz - 20kHz) ±0.5dB

Line level inputs

Input impedance (R and C) 50kΩ / 250pF

Input sensitivity (ref. 1W) 15mV

Maximum input signal >10V

Signal/Noise ratio (A-weighted ref 1W) 96dB

Frequency response (20Hz - 20kHz) ±0.3dB

Line level outputs

Output impedance Pre-amp 600Ω

Tape Source Z + 1kΩ

Maximum output level >10V

Tone controls

Treble ±12dB at 3, 6 or 12kHz

Bass ±12dB at 50, 120 or 250Hz

Bass EQ +3dB at 60Hz

+6dB at 36Hz

Infrasonic filter (Switchable) -3dB at 14Hz, 12dB / octave

POWER AMP SECTION

Continuous output power into 8Ω * 150W (21.7dBW)

Rated distortion (THD 20Hz - 20kHz) 0.03%

Clipping power (maximum continuous power per channel) 170W

IHF Dynamic headroom at 8Ω +4dB

IHF dynamic power (maximum short term power per channel) 8Ω 400W (26dBW)

4Ω 600W (28dBW)

2Ω 800W (29dBW)

Damping factor (ref. 8Ω, 50Hz) >120

Input impedance 30kΩ / 1500pF

Input sensitivity (for rated power into 8Ω) 1V

Frequency response 3Hz - 80kHz +0, -3dB

Signal/noise ratio ref. 1W 100dB

ref. rated power 122dB

THD (20Hz - 20kHz) <0.03%

Bridged Mode

Continuous output power into 8Ω * 400W (26dBW)

IHF Dynamic headroom at 8Ω +5dB

IHF dynamic power (maximum short term power per channel) 8Ω 1.2kW (31dBW)

4Ω 1.4kW (31.5dBW)

1 2 3

Comments to this Manuals

No comments

NAD Electronics 7600 User Manual Page 2

Comments to this Manuals

Related products and manuals for Loudspeakers NAD Electronics 7600